Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in San Carlos?
Gate parts and welding in San Carlos typically run $95 to $180 for a diagnostic and parts assessment, $150 to $450 for common part replacements (hinges, rollers, latches, brackets), and $250 to $900 for on-site welding of posts, frames, or hardware mounts. A full swing-gate hardware refresh or a commercial slide-gate weld repair often lands between $600 and $1,800 once parts, labor, and site welding are combined. Most residential jobs we handle in San Carlos are done the first visit because we carry gate-specific parts on the truck rather than making a parts run.
We’re gate-only specialists. Every technician and every tool on our truck is focused on gates, not plumbing, HVAC, or handyman work. That matters when a client in White Oaks or Brittan Acres needs a sagging driveway gate re-hung and a weld on the hinge post the same afternoon.
Gate Parts & Welding Cost Breakdown (2026)
Below are real ranges we see in San Carlos and the surrounding Peninsula. Parts costs shift with brand (Mighty Mule vs. FAAC vs. DoorKing pricing is very different), hardware grade (stamped vs. forged), and whether the repair is residential or commercial. Welding costs move with where the weld happens, mobile vs. in-shop, and metal type.
| Service | Typical Price Range (San Carlos, 2026) |
|---|---|
| Diagnostic / parts assessment visit | $95 – $180 |
| Hinge replacement (single, residential) | $85 – $180 per hinge, hardware included |
| Roller / guide wheel replacement (slide gate) | $120 – $260 per set |
| Latch, striker, and stop hardware | $110 – $240 |
| Gate arm / operator arm bracket replacement | $180 – $420 |
| Hinge post reinforcement weld (mobile) | $250 – $650 |
| Gate frame crack repair weld | $300 – $800 |
| Industrial / commercial weld repair (heavy steel) | $600 – $1,800+ |
| Full hardware refresh (residential swing gate) | $450 – $1,100 |
| Weld + parts combo repair (typical driveway call) | $600 – $1,800 |
What drives cost up or down in San Carlos specifically:
- Brand and part availability. A Mighty Mule hinge is generally less expensive than a FAAC or BFT component. LiftMaster and Linear hardware sit in the middle. DoorKing commercial hardware is the highest end of the range because the parts are heavier and the tolerances tighter.
- Residential vs. commercial. A 4-inch residential gate frame weld is a different job than a commercial slide gate rated for a DoorKing operator. Commercial work pushes pricing into the upper half of every range above.
- Mobile welding vs. in-shop. Most San Carlos repairs are done on-site because a swing gate doesn’t travel well. Mobile welding carries a slightly higher setup cost, but removing a gate to weld it offsite adds labor and transport.
- Paint, powder coat, or finish matching. If a fresh weld needs to be sealed and matched to existing powder coat or paint, expect $75 to $200 added for finish work.
- Access conditions. A rear-yard gate through narrow spacing or a steep driveway in the San Carlos hills changes setup time. Crews plan for access on those jobs.
What Affects Gate Parts & Welding Pricing in San Carlos
- Peninsula salt air and coastal fog. San Carlos sits close enough to the bay and the coastal fog line that steel hardware oxidizes faster than it would inland. Hinge pins, latches, and weld seams in older gates here often show corrosion sooner than the homeowner expects, which means weld prep takes longer and parts wear faster. That’s one reason hinge and latch replacements are a steady part of our San Carlos call volume.
- Age of the gate system. Much of the housing stock in neighborhoods like Howard Park, White Oaks, and Clearfield dates to the 1940s through 1970s. Original wrought-iron gates on those properties often need welding because the metal has fatigued at hinge points, not because anything was installed wrong.
- Which brand is on the opener or operator. We’re trained on nine brands (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule), so we don’t push brand lock-in or an unnecessary replacement. We check the existing system and recommend the right fix.
- Whether the wall, post, or gate frame is load-bearing. An anchor that’s pulled out of masonry needs a weld-and-reinforce job, not just a new hinge. That adds $200 to $500 depending on depth and access.
- Whether the job is repair-only or paired with an operator issue. Electric gate repair and welding overlap more often than people realize. A gate that’s binding often signals a worn hinge, an out-of-alignment post, or a failing operator arm. We diagnose first, replace only if necessary, and fix the root cause rather than welding the symptom.
- Parts inventory on the truck. Our tools and parts are gate-specific, so we arrive with common hinges, rollers, and hardware on hand. Fewer return trips means a lower total job cost for the client.
For a deeper look at the components we handle, including operator arms, hinges, and access hardware, see our Gate Parts & Welding in San Carlos page.
How to Save on Gate Parts & Welding
Honest ways to keep the bill in the lower end of the range without cutting corners on safety:
- Get a diagnostic before a replacement. A gate that “feels broken” is often a worn hinge, a slipped bracket, or a loose weld seam, not a dead operator. We diagnose first, replace only if necessary. That alone can save hundreds.
- Bundle the weld and the hardware. If a post weld needs to happen, replacing hinges and latches during the same visit is less expensive than scheduling two separate trips.
- Address corrosion early. San Carlos coastal air eats untreated steel. A small touch-up weld or hardware swap today costs far less than a frame rebuild after rust has spread.
- Keep the existing brand where it makes sense. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If the current system performs, we recommend the fix that keeps it working.
- Get a free estimate. For pricing questions before you commit to anything, call us at (855) 395-1573. Free estimates are the fastest way to know before you spend.
If you’re also weighing a scheduled maintenance visit against a one-off repair, that decision often saves real money over a gate’s lifetime. We cover both under one roof, so you don’t need to switch providers as your needs change. See our home page for the full range of gate repair, electric gate repair, and gate installation services.
Why Gate-Only Specialists Cost Less Over Time
Splitting gate work across plumbing, HVAC, and handyman crews means parts aren’t in stock, diagnostics take longer, and the first visit often ends with a parts order. We avoid that by staying gate-only. Every technician on every truck works on gates exclusively, which is why most San Carlos jobs we handle are back in motion the first visit.
Our training spans nine brands for a reason. A LiftMaster residential swing operator, a FAAC estate-class slide gate, a DoorKing commercial entry, and a Ghost Controls DIY-friendly opener all fail in different ways. Some fail at the motor. Some fail at the control board. Some fail at a hinge pin that was never greased. Some fail because a weld seam finally gave way after years of San Carlos coastal moisture. Knowing the difference is the whole job.
Common gate systems we service across San Carlos and Peninsula neighborhoods:
- Residential swing gates and slide gates, including driveway and side-yard entries
- Estate-class automated entrances with FAAC or BFT operators
- Commercial-grade entry systems with DoorKing or LiftMaster operators
- Mid-range residential operators from Linear and Elite
- DIY-installed systems using Viking or Mighty Mule where the original install needs correction
From the opener to the arm, from the sensor to the keypad, our diagnostics cover the full system, not just the visible hardware. If a gate is binding, sagging, or dragging, the fix is often a weld on a post or a fresh set of hinges, and we’d rather do that than replace an operator that’s still working.
What we typically see on San Carlos gate calls
In White Oaks, we regularly see spring-loaded residential swing gates with hinge fatigue from years of use in coastal air. Around Howard Park, older wrought-iron gates on brick pillars often need a masonry anchor weld because the original anchors have loosened. In the hills above Alameda de las Pulgas, gates on sloped driveways put extra torque on operators, which wears arms and brackets faster. Near Laurel Street, commercial entries see heavier daily cycle counts and need tougher hardware. None of these are exotic problems, but the fix is different each time, and pricing follows the actual work.
FAQs – Gate Parts & Welding Cost
How much does gate parts and welding cost in San Carlos?
Most gate parts and welding jobs in San Carlos fall between $150 and $900, with a typical driveway repair landing around $400 to $700 once parts and mobile welding are combined. Commercial jobs and full hardware refreshes push into the $1,100 to $1,800 range. Call (855) 395-1573 for a free estimate on your specific gate.
Is it cheaper to repair or replace a gate in San Carlos?
Repair is almost always cheaper, often by 60% to 80% versus a new gate installation. A hinge, latch, or weld repair usually runs $150 to $800, while a full replacement gate lands in the thousands. We diagnose first and only recommend replacement when the frame is structurally compromised. If the metal is sound, repair is the right call, and we’ll tell you so.
Do you weld on-site in San Carlos, or does the gate come off?
Most welding is done on-site with mobile equipment, and the on-site weld runs $250 to $900 depending on scope. Removing a gate for shop welding adds labor and transport on top of the weld itself. For swing gates and most slide gates, on-site is the practical choice. Call (855) 395-1573 to schedule a diagnostic.
How much does a diagnostic visit cost?
A gate parts and welding diagnostic in San Carlos runs $95 to $180. That visit is where we identify whether the issue is parts, welding, or something in the operator (motor, control board, safety sensor, or access control). We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the diagnostic covers your actual brand, not a generic one.
Can you come today for a broken gate in San Carlos?
Same-day availability depends on scheduling, but most San Carlos calls are worked into the next available slot, and we aim to have every gate back in motion the first visit. If parts are on the truck (hinges, rollers, latches, common hardware), most repairs finish the same day. Call (855) 395-1573 to check today’s availability and get a free estimate.
Contact Us for a Free Estimate
If your gate is sagging, dragging, or the hardware has given out, we can tell you what it needs and what it costs before you commit. We’re a gate-only specialist serving San Carlos, and we work on your brand: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (855) 395-1573 for a free estimate, and we’ll get your gate working the first visit.
Pricing reflects the San Carlos market as of 2026. Gate Repair San Carlos offers free estimates – call (855) 395-1573.
What Our Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Ruben Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Carlos Ramirez"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Steve Anderson