Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Kensington, CA
We provide independent Ghost Controls gate repair across Kensington, and the work here follows County of San Diego code because Kensington sits in unincorporated territory. That distinction matters when mains wiring or permitting enters the picture. We service the full Ghost Controls line: AXS, PROA, HS, and TDS tube-and-arm kits. Call (855) 395-1573 for a free estimate.
We’re gate-only specialists, not a general contractor that happens to see gates sometimes. Every service call we run in Kensington involves a technician who knows Ghost Controls operators because they’ve worked on them repeatedly, not because they watched a video at lunch. See our Ghost Controls sales & service page for the full scope of what we handle.
Why Kensington Residents Choose Us for Ghost Controls Service
Most companies can install a gate opener. Diagnosing why a Ghost Controls AXS stalls halfway open on a 1930s wrought-iron gate set into a settling stucco wall takes a different level of familiarity. That’s what we do. Noel Figueiredo grew up in the White Oaks neighborhood of San Carlos and has spent over a decade working on Peninsula gates: sliding, swing, overhead, and everything between. The team follows his lead: diagnose first, replace only if necessary.
We keep genuine Ghost Controls boards, arms, batteries, and solar regulators in stock, plus quality aftermarket actuators, keypads, and remotes for situations where an OEM part is discontinued or priced beyond reason. When you call about Kensington Gate Repair, we bring the parts that likely fix it, not a catalog and a promise to return next week. Honest over convenient: if your operator is sound but the hinge post footing is the real failure, we’ll tell you before we sell you a motor.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Kensington
- Solar charge failure and battery drain. Kensington gets long stretches of hot, sunny afternoons, and a solar panel cooking on a stucco wall wears out regulators faster than the mild temperature suggests. The gate dies mid-cycle with a low-battery fault, and the fix is often the regulator, not the battery.
- Actuator-arm binding from slope-settled hinge posts. Kensington’s hillside lanes mean posts settle into the slope. A Ghost Controls PROA or AXS arm starts binding as the gate falls out of plumb, triggering obstruction or overcurrent stops that look like an operator problem but are actually a footing problem.
- Remote and keypad dropout. San Diego sun bakes plastic housings until they crack, and winter rain finds the failed seal and corrodes the low-voltage connections at the control box. Keypads stop talking to the board, and remotes need reprogramming.
- Limit and travel-calibration drift. Gates creep open a few inches after arming because the arm mount shifted as wood or stucco settled. The operator doesn’t know where “closed” is anymore, so it wanders.
- Battery-backup failure on HS series units. The HS low-voltage swing opener depends on a battery that wears silently. When it fails, the gate behaves like it’s possessed: slow travel, partial opening, then nothing.
Ghost Controls Service in Kensington: What Local Conditions Mean for Your Equipment
Here’s what separates Ghost Controls repair in Kensington from the same job in, say, Del Cerro or Grantville: this is unincorporated San Diego County. If a repair or new install touches mains wiring or requires permitting, the County of San Diego rules govern, not City of San Diego. A contractor who quotes city code or pulls a city permit is wrong before the first screw turns. And the hillside lanes off Kensington Drive add another layer. The stucco walls and original footings from the 1920s through 1940s were built well, but six or nine decades of slope settlement means the hinge post footing drifts. We regularly find gates that are fine and operators that are fine, but the post has moved enough that the Ghost Controls arm is fighting gravity every cycle. Fix the footing, realign the leaf, recalibrate the limits, and the opener works. Skip the footing and you’ll be back in six months with the same fault code.
A gate that hesitates is a gate that’s asking for help – don’t wait until it quits on you.
Ghost Controls Models & Products We Service in Kensington
We work with every Ghost Controls product line you’re likely to have on a Kensington driveway: the AXS Series single-swing opener, the PROA Series heavy-duty dual-swing opener for wider gates, the HS Series low-voltage swing opener, and TDS tube-and-arm actuator kits. We also handle accessories: keypads, remotes, solar panels, and battery systems. Parts approach: genuine Ghost Controls when the OEM component is the right call, quality aftermarket when it’s discontinued or the honest option. We keep the most common boards and arms locally so a Ghost Controls in Allied Gardens or Kensington service call doesn’t wait on a FedEx truck.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Kensington
Service calls in Kensington generally run between $95 and $180 for the diagnostic visit, and that fee is applied to the repair if you approve the work. Typical repairs land between $150 and $500 depending on what’s wrong: a solar regulator replacement costs far less than a control board, and a hinge post re-anchor runs more than a travel recalibration. Battery replacements for HS or AXS units typically fall between $80 and $200, and a full operator replacement starts around $600 and goes up from there depending on the model and gate size.
| Service | Typical Range |
|---|---|
| Service call & diagnostic | $95 – $180 |
| Battery replacement (AXS/HS) | $80 – $200 |
| Solar regulator / panel repair | $150 – $400 |
| Hinge post re-anchor & realign | $300 – $700 |
| Control board replacement | $250 – $550 |
| Full operator replacement | $600 – $1,500+ |
The price is agreed before any work starts, so there’s no invoice surprise at the end. Call (855) 395-1573 for an exact quote; estimates are free. We’re out in the Kensington service area regularly and can usually fit a diagnostic in quickly.
Serving Kensington, CA – Our Local Coverage Area
We’re based in the Kensington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Kensington
Yes. Kensington is unincorporated San Diego County, so any work that touches mains wiring or structural elements follows County of San Diego permitting rules, not City of San Diego. Most straightforward operator replacements on an existing gate don’t require a permit, but we’ll tell you exactly what applies to your project before work begins.
Afternoon heat can cook a failing solar regulator, and a weak battery will quit mid-cycle under load. In Kensington the panel gets intense sun for long stretches, so the regulator often fails before the battery does. We test both on site rather than guessing. Call (855) 395-1573 to schedule a diagnostic.
Yes, provided the hinge posts and footings are still solid. We’ve mounted AXS and PROA operators on original Kensington iron gates many times. If the footing has settled on the slope, we re-anchor the post first; otherwise the new operator will fight the same binding that killed the old one.
Yes. We install keypads, intercom and phone entry, and safety sensors on existing Ghost Controls setups across Kensington. If the control board is older and won’t support the accessory you want, we’ll show you the least expensive path to make it work.
No. We use genuine Ghost Controls boards where OEM is the right long-term fix, and quality aftermarket boards when the OEM version is discontinued or bad-value. The call is yours to approve; we’ll walk you through the trade-off before any order is placed. Call (855) 395-1573 for a straight answer on your specific board.
Service Areas Near Kensington
We serve Kensington and the surrounding neighborhoods: San Carlos, Allied Gardens, Del Cerro, Grantville, Lake Murray, and Tierrasanta. If you’re nearby, chances are we’re already in the area. See Ghost Controls service in Normal Heights or Ghost Controls service in San Carlos for more.
Book Your Ghost Controls Service in Kensington Today
Call (855) 395-1573 to book a diagnostic or get a free estimate. We can often reach Kensington the same day for operator faults and jammed gates. The quote is agreed before any work starts.
Written by Noel Figueiredo, Owner at Gate Repair San Carlos, serving Kensington and the surrounding area.